Copper Micro-Flowers for Electrocatalytic Sensing of Nitrate Ions in Water
Roberta Farina, Giuseppe D’Arrigo, Alessandra Alberti, Silvia Scalese, G. Capuano, D. Corso, Giuseppe Andrea Screpis, Maria Anna Coniglio, Guglielmo G. Condorelli, Sebania Libertino
Abstract
The progressive increase in nitrate’s (NO3−) presence in surface and groundwater enhances environmental and human health risks. The aim of this work is the fabrication and characterization of sensitive, real-time, low-cost, and portable amperometric sensors for low NO3− concentration detection in water. Copper (Cu) micro-flowers were electrodeposited on top of carbon screen-printed electrodes (SPCEs) via cyclic voltammetry (with voltage ranging from −1.0 V to 0.0 V at a scan rate of 0.1 V s−1). The obtained sensors exhibited a high catalytic activity toward the electro-reduction in NO3−, with a sensitivity of 44.71 μA/mM. They had a limit of detection of 0.87 µM and a good dynamic linear concentration range from 0.05 to 3 mM. The results were compared to spectrophotometric analysis. In addition, the devices exhibited good stability and a maximum standard deviation (RSD) of 5% after ten measurements; reproducibility, with a maximum RSD of 4%; and repeatability after 10 measurements with the RSD at only 5.63%.