Influence of TiO<sub>2</sub> and Y<sub>2</sub>O<sub>3</sub> nanoparticles on mechanical properties of aluminium matrix hybrid nanocomposites fabricated by vacuum die casting
Mandeep Singh, Khushdeep Goyal, Deepak Bhandari
Abstract
Purpose The purpose of this paper is to evaluate the effect of titanium oxide (TiO 2 ) and yttrium oxide (Y 2 O 3 ) nanoparticles-reinforced pure aluminium (Al) on the mechanical properties of hybrid aluminium matrix nanocomposites (HAMNCs). Design/methodology/approach The HAMNCs were fabricated via a vacuum die-assisted stir casting route by a two-step feeding method. The varying weight percentages of TiO 2 and Y 2 O 3 nanoparticles were added as 2.5, 5, 7.5 and 10 Wt.%. Findings Scanning electron microscope images showed the homogenous dispersion of nanoparticles in Al matrix. The tensile strength by 28.97%, yield strength by 50.60%, compression strength by 104.6% and micro-hardness by 50.90% were improved in HAMNC1 when compared to the base matrix. The highest values impact strength of 36.3 J was observed for HAMNC1. The elongation % was decreased by increasing the weight percentage of the nanoparticles. HAMNC1 improved the wear resistance by 23.68%, while increasing the coefficient of friction by 14.18%. Field emission scanning electron microscope analysis of the fractured surfaces of tensile samples revealed microcracks and the debonding of nanoparticles. Originality/value The combined effect of TiO 2 and Y 2 O 3 nanoparticles with pure Al on mechanical properties has been studied. The composites were fabricated with two-step feeding vacuum-assisted stir casting.