Investigation on Machinability Characteristics of Inconel 718 Alloy in Cryogenic Machining Processes
Le Gong, Yu Su, Yong Liu, Wei Zhao, Aqib Mashood Khan, Muhammad Jamil
Abstract
In this innovative work, Inconel 718 alloy turning simulation models under dry and cryogenic machining (Cryo) conditions are developed. The machinability characteristics of the aforementioned alloy were assessed with relation to cutting temperature (Tct) and cutting force (Fcf). The comparison of the Tct and Fcf results from simulation with those obtained under the identical experimental conditions served as additional evidence of the effectiveness of the suggested simulation model. By varying the cutting speed, the reduction in Tct under Cryo conditions was 9.36% to 11.98% compared to dry cutting. Regarding the force comparison under experiment and simulation, the average difference between the simulation and experimental values for the main cutting force (Fc) was 13.73%, whereas the average deviation for the feed force (Ff) was 14.63%. Response surface methodology (RSM) was employed to build the forecasting models for Tct and Fcf in cryogenic settings. These mathematical models showed excellent predictive performance and were able to estimate the Tct and Fcf under machining operations settings, according to the present research. When compared to dry cutting, Cryo reduced the cutting temperature, which had a positive impact on the alloy’s machinability.