Litcius/Paper detail

Contact time and disinfectant formulation significantly impact the efficacies of disinfectant towelettes against Candida auris on hard, non-porous surfaces

Maxwell G. Voorn, Alyssa M. Kelley, Gurpreet K. Chaggar, Xiaobao Li, Peter J. Teska, Haley F. Oliver

2023Scientific Reports19 citationsDOIOpen Access PDF

Abstract

Abstract There has been an increase in Candida auris healthcare-associated infections, which result from cross-contamination from surfaces and equipment. In this study, we tested the efficacies of EPA-registered disinfectant towelettes products that are increasingly used for infection control against C. auris at a range of contact times following modifications to standard EPA protocol MB-33-00. Hydrogen peroxide (HP)-based disinfectant towelettes were more efficacious against C. auris than the quaternary ammonium chloride (QAC)-alcohol-based disinfectant towelettes irrespective of tested contact times. Thirty s contact time was significantly less effective in reducing C. auris compared to 1-, 2-, 3-, and 10-min contact times. However, there were no statistically significant differences in the level of disinfection among 1-min and longer contact times regardless of product chemistry. None of the products achieved a standard six-log 10 reduction at any tested contact times. Overall , the HP-based disinfectant towelette was significantly more fungicidal than the QAC-alcohol-based disinfectant towelette. For all product types, 30 s contact time did not achieve the same level of disinfection as 1-min or longer contact times. Overall, disinfectant towelette efficacy is dependent upon product formulation and contact time.

Topics & Concepts

DisinfectantCandida aurisMicrobiologyToxicologyChemistryMedicineAntifungalBiologyOrganic chemistryMedical Device Sterilization and DisinfectionInfection Control in HealthcareAntifungal resistance and susceptibility
Contact time and disinfectant formulation significantly impact the efficacies of disinfectant towelettes against Candida auris on hard, non-porous surfaces | Litcius