Litcius/Paper detail

Electrochemical and computational investigations of the Thysanolaena latifolia leaves extract: An eco-benign solution for the corrosion mitigation of mild steel

Abhinay Thakur, Ashish Kumar, Savaş Kaya, F. Benhiba, Shveta Sharma, Richika Ganjoo, Humira Assad

2023Results in Chemistry69 citationsDOIOpen Access PDF

Abstract

The development of eco-benign corrosion inhibitors is gaining increased attention due to the non-biodegradability and toxic effects of conventional inhibitors. In this study, the anti-corrosive efficacy of Thysanolaena latifolia leaves extract (TLLE) has been evaluated on mild steel in an acidic solution (0.5 M HCl) by employing various approaches including gravimetric assessment, electrochemical measurements, scanning electron microscopy and energy dispersive X-ray spectroscopy. The outcomes demonstrated that with the increased concentration of TLLE from 50 ppm to 1000 ppm, the inhibition efficiency (IE%) elevated up to 93.90 % and the corrosion rate decreased significantly from 2.513 mm/yr to 0.203 mm/yr at 298 K. Moreover, it was revealed that at a higher concentration (1000 ppm), the Rp values increased from 30.784 Ω to 157.83 Ω with an Rct in value of 159.627 Ω cm2 suggesting the defensive film formation by TLLE molecules over the metallic surface. The quantum chemical analytics further underpinned the empirical findings, showing a high ΔE(eV) value of 0.239 and interaction and binding energies of −995.45 and 995.45 for TLLE molecules upon Fe (1 1 0) substrate. The findings indicate that TLLE has a promising prospect as an eco-benign and efficient inhibitor for preventing the corrosion of mild steel in corrosive environments.

Topics & Concepts

CorrosionGravimetric analysisElectrochemistryMoleculeMaterials scienceScanning electron microscopeAnalytical Chemistry (journal)Nuclear chemistryChemistryMetallurgyPhysical chemistryComposite materialEnvironmental chemistryOrganic chemistryElectrodeCorrosion Behavior and InhibitionConcrete Corrosion and DurabilityHydrogen embrittlement and corrosion behaviors in metals