High-Performance Electro-optical Dual-Mode Color-Changing and Energy Storage Device Based on Mo-Doped WO<sub>3</sub> and TiO<sub>2</sub>/NiO Thin Films
HaoRui Liu, Jikai Yang, ChunLei Liu, Tianzi Xiang, LiuMenghan Zheng, Guanxu Liu, Jinying Fang, Yining Mu, Weijun Chen
Abstract
Under optical and electrical control, a multifunctional electro-optical dual-control color-changing and energy storage device not only realizes fast color conversion but also achieves good energy storage performance. In this work, Mo-doped WO 3 (Mo-WO 3 ) films were prepared by a one-step hydrothermal method, among which the 2 at. % Mo-doped WO 3 film has the best electrochromic and energy storage performance. Meanwhile, TiO 2 /NiO composite films were prepared by the hydrothermal method and electrodeposition method. The TiO 2 /NiO/N719 photoanode was prepared by the dip-dyeing method on the TiO 2 /NiO composite film. The results show that the TiO 2 /NiO-10s/N719 composite film has excellent photoelectric conversion and energy storage properties. Finally, choosing Mo-WO 3 as the cathode and the TiO 2 /NiO/N719 film as the anode, a multifunctional electro-optical dual-control Mo-WO 3 @TiO 2 /NiO/N719 color-changing and energy storage device was constructed. Under electrical control, it shows a fast color switching rate (the coloring/bleaching time is 4.1/2.9 s), excellent coloration efficiency (62.1 cm 2 /C), obviously improved area capacitance (90.4 mF/cm 2 ), and excellent cycle stability. Under optical control, it shows a shortened optical response time (the coloring/bleaching is 70.3/158.9 s), excellent coloration efficiency (58.2 cm 2 /C), better area capacitance (51.1 mF/cm 2 ), and excellent photoelectric conversion efficiency.