Litcius/Paper detail

Real Depth-Correction in Ground Penetrating RADAR Data Analysis for Bridge Deck Evaluation

Sepehr Pashoutani, Jinying Zhu

2023Sensors15 citationsDOIOpen Access PDF

Abstract

When ground penetrating radar (GPR) is used for the non-destructive evaluation of concrete bridge decks, the rebar reflection amplitudes should be corrected for rebar depths to account for the geometric spreading and material attenuation of the electromagnetic wave in concrete. Most current depth-correction methods assume a constant EM wave velocity in the entire bridge deck and correct GPR amplitudes based on the two-way travel time (TWTT) instead of the actual rebar depth. In this paper, we proposed a depth-correction algorithm based on the real rebar depths. To compare different depth-correction methods, we used gprMax software to simulate GPR signals in four models with various dielectric constants and conductivity. The comparison shows that the TWTT-based depth-correction method tends to over-correct GPR amplitudes so that underestimates the deterioration level of concrete decks at certain locations. Two depth-based correction methods are proposed that use migrated amplitudes and further normalize the corrected amplitude by rebar depth (attenuation rate). These methods are then applied to GPR data collected on two bridges, and the results were validated by other NDE methods and chloride concentration test.

Topics & Concepts

RebarGround-penetrating radarAttenuationAmplitudeGeologyReflection (computer programming)RadarMeasured depthAcousticsBridge (graph theory)Geotechnical engineeringStructural engineeringComputer scienceEngineeringOpticsGeophysicsPhysicsTelecommunicationsProgramming languageMedicineInternal medicineGeophysical Methods and ApplicationsMicrowave Imaging and Scattering AnalysisGeophysical and Geoelectrical Methods
Real Depth-Correction in Ground Penetrating RADAR Data Analysis for Bridge Deck Evaluation | Litcius