Study of Electrodeposition and Properties of Composite Nickel Coatings Modified with Ti3C2TX MXene
В. Н. Целуйкин, Asel Dzhumieva, Alena Tribis, Denis B. Tikhonov, Alexey Tsyganov, Nikolay Gorshkov, Marina Lopukhova
Abstract
In this work we have synthesized Ti3C2TX MXene powder and studied its structure. Composite electrochemical coatings (CECs) of Ni-Ti3C2TX MXene were obtained from a sulfate– chloride bath in the galvanostatic regime. The microstructure of CEC was researched using X-ray phase analysis and scanning electron microscopy methods. It has been established that a Ni–Ti3C2TX MXene CEC microhardness rises by about 1.80 times compared with electrolytic Ni without a dispersed phase. For corrosion research, different corrosive media is applied. The corrosion–electrochemical behavior of Ni–Ti3C2TX MXene CECs by the chronovoltamperometry method in 0.5 M H2SO4 solution has been investigated. Trials in 3.5% NaCl have shown that Ti3C2TX MXene inclusion into the matrix of the electrochemical Ni results in a decrease in the corrosion rate by 1.60–1.75 times. These effects are due to the addition of Ti3C2TX MXene into the nickel matrix and the formation of CECs with a strengthening fine-grained structure.