Analysis of turning on A286 alloy with different environmental conditions
M. Naresh Babu, V. Anandan, M. Dinesh Babu
Abstract
Recent research has mostly focused on replacing traditional lubricants with nanoparticle-based fluids to increase machining performance. The current work compares three distinct environmental conditions in turning of A286 alloy: oil machining (OM), nano Low Quantity Lubrication (nLQL), and LN2 (liquid nitrogen). Cutting speed (Vs), environment, and feed rate (f) were used as control parameters, with responses assessed in terms of flank wear (Vb), crater wear, surface roughness (Ra), machining temperature (Mt), and chip morphology. The L27 array was chosen for the testing runs. The experimental findings demonstrated that LN2 cooling significantly lowered Ra by 54% and 24%, Vb by 62% and 53%, and Mt by 45% and 73% when compared to the OM and nLQL settings. Under cryogenic circumstances, surface integrity was also enhanced. COPRAS, a multi-response optimization approach, was used to determine the best trials for picking the best outcomes.