Spotlight: A 3-D Indoor Localization System in Wireless Sensor Networks Based on Orientation and RSSI Measurements
Huang Cheng-lin, Zengshan Tian, Wei He, Kaikai Liu, Ze Li
Abstract
With the increasing demand for location-based services, indoor localization technology based on wireless sensor networks (WSNs) has recently received significant attention. Bluetooth low energy (BLE) has become a research hotspot among the numerous WSNs due to its ubiquitous deployment, low-power consumption, and low cost. Many previous BLE-based indoor localization technologies can only use received signal strength indication (RSSI) for localization in the 2-D plane and achieve coarse accuracy. However, high-accuracy location information is required in an increasing number of applications, e.g., elderly fall detection for medical applications, which urgently requires a new BLE-based localization technology in 3-D space. To this end, we propose Spotlight, an angle-based fine-grained indoor localization system in 3-D space using BLE sensors. The critical idea of the Spotlight is to measure the angle-of-arrival (AoA) and elevation-of-angle (EoA) of the signal from the target to the BLE receivers and utilize them to achieve accurate 3-D localization. Specifically, we develop an offset elimination algorithm and data stitching algorithm, utilizing the second-order cone (SoC) programming to obtain accurate angle estimates. Then, the simulated annealing algorithm (SAA) is used to search for the target location in 3-D space. Finally, we develop the prototype system with commercial off-the-shelf (COTS) BLE sensors and conduct extensive experiment measurements in real-world scenarios. The results demonstrate that the proposed system can achieve a median localization error of 36 cm in the 2-D plane and 48 cm in the 3-D space.