Microstructure and Mechanical Characterization of AISI 4340 Steel Additively Manufactured by Laser Powder Bed Fusion
Félix Aguilar, Thinh Huynh, Nemanja Kljestan, Marko Knežević, Yongho Sohn
Abstract
The effects of laser powder bed fusion (LPBF) parameters, such as power (200 to 350 W) and scan speeds (from 200 to 2000 mm/s), on the microstructure and mechanical properties of high-strength, low-alloy (HSLA) AISI 4340 steel were examined. A wide range of volumetric energy density (VED) between 93 and 162 J/mm3 produced samples with relative densities greater than 99.8%. The optimal parameter set was identified with laser power = 200 W, scan speed = 600 mm/s, hatch spacing = 0.12 mm, and slice thickness = 0.03, corresponding to VED = 92.6 J/mm3. Scanning electron microscopy revealed a predominantly martensitic microstructure for all processing parameters examined, although X-ray diffraction revealed the minor presence of retained austenite within the as-fabricated 4340 steel. Using the optimized LPBF parameters, the as-fabricated 4340 steel exhibited a yield strength of 1317 MPa ± 16 MPa, ultimate tensile strength of 1538 MPa ± 22 MPa, and 18.6 ± 1% strain at failure. These are similar to wrought 4340 steel quenched and tempered between 400 and 600 °C.