Shape sensing of optical fiber Bragg gratings based on deep learning
Samaneh Manavi Roodsari, Antal Huck-Horvath, Sara Freund, Azhar Zam, Georg Rauter, Wolfgang Schade, Philippe C. Cattin
Abstract
Abstract Continuum robots in robot-assisted minimally invasive surgeries provide adequate access to target anatomies that are not directly reachable through small incisions. Achieving precise and reliable shape estimation of such snake-like manipulators necessitates an accurate navigation system, that requires no line-of-sight and is immune to electromagnetic noise. Fiber Bragg grating (FBG) shape sensing, particularly eccentric FBG (eFBG), is a promising and cost-effective solution for this task. However, in eFBG sensors, the spectral intensity of the Bragg wavelengths that carries the strain information can be affected by undesired bending-induced phenomena, making standard characterization techniques less suitable for these sensors. We showed in our previous work that a deep learning model has the potential to extract the strain information from the eFBG sensor’s spectrum and accurately predict its shape. In this paper, we conducted a more thorough investigation to find a suitable architectural design of the deep learning model to further increase shape prediction accuracy. We used the Hyperband algorithm to search for optimal hyperparameters in two steps. First, we limited the search space to layer settings of the network, from which, the best-performing configuration was selected. Then, we modified the search space for tuning the training and loss calculation hyperparameters. We also analyzed various data transformations on the network’s input and output variables, as data rescaling can directly influence the model’s performance. Additionally, we performed discriminative training using the Siamese network architecture that employs two convolutional neural networks (CNN) with identical parameters to learn similarity metrics between the spectra of similar target values. The best-performing network architecture among all evaluated configurations can predict the shape of a 30 cm long sensor with a median tip error of 3.11 mm in a curvature range of 1.4 m −1 to 35.3 m −1 .