The effect of turbulent coherent structures in atmospheric flow on wind turbine loads

Abstract

Large wind turbines face more intricate atmospheric conditions with turbulent coherent structures sized similarly to the rotor diameter, posing loading challenges. The present study assesses twelve distinct wind fields using the Large Eddy Simulations (LES) and International Electrotechnical Commission (IEC) Kaimal model scaled to their LES counterpart. The hub height wind speed in the different cases was set to 8.5 m/s (below-rated), 11.5 m/s (at-rated), and 14.5 m/s (above-rated). In a previous study, it was found that the unscaled IEC model-based wind field is conservative and scaled IEC model-based wind fields were found to yield different loads than upon use of LES-based wind fields in different atmospheric stability conditions. The present study aims to understand these differences. Utilizing Spectral Proper Orthogonal Decomposition (SPOD), the original wind fields were decomposed and reconstructed to study the influence of large and small coherent structures represented by their distinct frequencies. SPOD analysis was complemented by wind field spectral analysis considering atmospheric surface layer height, integral length scales, and co-coherence estimates. Integral length scales in the scaled IEC Kaimal model were found to be half of those in unstable atmosphere LES wind fields. The aero-elastic impact on the IEA 22 MW reference wind turbine with a 280 m rotor diameter was evaluated. The analysis reveals that large coherent structures, particularly low-frequency ( ≤ 0 . 06 Hz) ones, significantly impact wind turbine loads, contingent upon atmospheric stratification. Compared to the scaled IEC Kaimal model wind field, the maximum tower fore–aft bending moment and the maximum blade root flap-wise bending moment were found to be higher, for example, by 10% and 5% respectively in an unstable atmosphere during below-rated wind turbine operation. In the same scenario, standard deviation of the tower fore–aft bending moment was found to be higher by up to 50% while standard deviation of the blade root flap-wise bending moment was found to be lower by up to 25%. These findings underscore the critical importance of accurately modeling atmospheric turbulence and its coherent structures for more reliable design and operation of large wind turbines. • Analyzed 12 wind fields via LES and scaled IEC Kaimal model for load comparison. • Novel use of SPOD to identify coherent structures affecting turbine loads. • In unstable ABL, tower/blade loads rose 15%/8% vs. scaled IEC Kaimal wind field. • Tower/ blade load deviation differed by +50%/-25%, vs. scaled IEC Kaimal wind field. • Conducted spectral analysis up to 300 m at scales relevant for large wind turbines.

Topics & Concepts