Ultra-Low on-State Voltage IGCT for Solid-State DC Circuit Breaker With Single-Switching Attribute
Jiapeng Liu, Zhanqing Yu, Wenpeng Zhou, Zhengyu Chen, Chunpin Ren, Biao Zhao, Fengying Wang, W. Ji, Meng Li, Rong Zeng
Abstract
The performance of solid-state dc circuit breaker (SS-DCCB) is mainly determined by the on-state feature of power device. In this article, an optimized low on-state voltage integrated gate-commutated thyristor (LO-IGCT) for SS-DCCB is developed. First, the impacts of device parameters, including base length, carrier lifetime, and emitter injection efficiencies, on on-state voltage are presented. The boundary conditions raised by blocking voltage and safe operation area (SOA) are analyzed. Based on that, a three-step blocking-SOA-emitter optimization routine is proposed. Then, the optimization methodology for doping profiles in different regions, especially in n-drift, n buffer, p <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">+</sup> base, n <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">+</sup> emitter, and p <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">+</sup> emitter regions, is presented. The optimal values are derived with theoretical deduction or numerical calculation. After that, based the optimization result, samples of LO-IGCTs are fabricated and tested. The fabricated LO-IGCT sample shows a blocking voltage capability over 4500 V and an on-state voltage of 1.11 V at the current of 2000 A. The commercialized IGCT and IGBT optimized for high-frequency applications exhibits 1.23 and 1.85 times the on-state voltage under the same test configuration.