Exploring the capabilities of active grids
Lars Neuhaus, Frederik Berger, Joachim Peinke, Michael Hölling
Abstract
Abstract Active grids are commonly used in wind tunnels to generate turbulence with different characteristic features. In contrast to the common objective to generate turbulence with a very high Reynolds number, this work focuses on a method of blockage induced flow design for the generation of special flow structures. Particularly, we aim to investigate the underlying constraints of this excitation method. For this purpose, the scale dependency of the excitation is studied by clearly defined structures such as periodic sinusoidal velocity variations, velocity steps, and single gusts. It is shown that the generation process is limited by the reduced frequency of the active grid motion. For low values of reduced frequencies the imprinted flow structures remain undamped, whereas for higher reduced frequencies they are damped. This insight leads to the constraint that the active grid motion needs to be modified to compensate for the underlying dynamic damping effects. Thus, the inserted energy has to be increased for the corresponding reduced frequencies. This finding can be transferred to the generation of turbulent flows, for which an exemplary adaption is shown . Graphic abstract