Optimization of spinning parameters of 20/316L bimetal composite tube based on orthogonal test
Wenbin Xu, Yingying Yang, Chenwei Dai, Jingang Xie
Abstract
Abstract The spin forming parameters of bimetallic composite pipe were optimized by FEM and experiment, and the torque and the residual contact pressure were analyzed during forming process. Adoption of The orthogonal test of four factors and five levels to gain the optimal spinning parameters ( δ = 0.16mm, Ψ = 0.4mm, β = 3.0 ∘ , f = 0.5) and the effects of factors on analysis indicators under the condition of maximum residual contact pressure and small torque. The simulation results showed that the residual contact pressure was nearly 1MPa higher and the torque was lower about 160N·m than unoptimized results. It proved that the orthogonal test method was effective for the optimization of spinning parameters of bimetal composite tube. The accuracy of numerical simulation value was verified by the drawing experiment of the composite tube.