Design and Analysis of an Electrical Balance Duplexer With Independent and Concurrent Dual-Band TX-RX Isolation
Kejian Shi, Hooman Darabi, A.A. Abidi
Abstract
An electrical balance duplexer (EBD) supports dual-band TX-RX isolation enabling frequency-division duplexing (FDD) operation at 5-7 GHz for Wi-Fi 6/6E. A programmable balance network in the EBD can balance the antenna impedance ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Z_{\text {ANT}}$ </tex-math></inline-formula> ) in the TX channel and RX channel independently and simultaneously. An on-chip passive bandstop filter as a part of the balance network is implemented, achieving sub-2-dB passband insertion loss (IL) and >20-dB stopband rejection with 10% frequency spacing. This filter separates two impedance tuners in the balance network and enables the independent tunability at two bands. A comprehensive and rigorous analysis of general <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LCR</i> two-ports shows the limit of the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$s_{21}$ </tex-math></inline-formula> frequency selectivity when built with finite- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q$ </tex-math></inline-formula> elements. The analysis guides the filter design, which guarantees the maximum frequency selectivity. The analysis is then extended to <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LCR</i> <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${N}$ </tex-math></inline-formula> -ports as the complete analysis. The EBD provides >40-dB isolation in an 80-MHz channel bandwidth in the TX band (5-6 GHz), for any <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Z_{\text {ANT}}(f_{\text {TX}})$ </tex-math></inline-formula> within VSWR = 2, and independently in the RX band (6-7 GHz) when <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q_{\text {ANT}}< 4.3$ </tex-math></inline-formula> . The EBD is designed for ≤4-dB RX IL and ≤3.8-dB TX IL, and it supports +29-dBm TX output. The EBD is implemented in Towerjazz 65-nm RF silicon-on-insulator (SOI) CMOS technology and occupies an area of 2.3 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> .