Feedback Control of Electrospray with and without an External Liquid Pump Using the Spray Current and the Apex Angle of a Taylor Cone for ESI-MS
Zhongbao Han, Shoki Hishida, Nozomu Omata, Takeshi Matsuda, Ryoki Komori, Lee Chuin Chen
Abstract
An electrospray operated in the steady cone-jet mode is highly stable but the operating state can shift to pulsation or multijet modes owing to changes in flow rate, surface tension, and electrostatic variables. Here, a simple feedback control system was developed using the spray current and the apex angle of a Taylor cone to determine the error signal for correcting the emitter voltage. The system was applied to lock the cone-jet mode operation against external perturbations. For a pump-driven electrospray at a regulated flow rate, the apex angle of the Taylor cone decreased with increasing voltage. In contrast, for a voltage-driven electrospray with low flow resistance, the angle was found to increase with the emitter voltage. A simple algorithm based on iterative learning control was formulated and implemented using a personal computer to automatically correct the emitter voltage in response to the error signal. For voltage-driven electrospray ionization (ESI), the feedback control of the spray current can also be used to regulate the flow rate to an arbitrary value or pattern. Electrospray ionization-mass spectrometry (ESI-MS) with feedback control was demonstrated to produce ion signal acquisition with long-term stability that was insusceptible to the emulated external disturbances.