SrF<sub>x</sub>‐based electron‐selective contact with high tolerance to thickness for crystalline silicon solar cells enabling efficiency over 21%
Chunfang Xing, Conghui Jiang, Wenbo Gu, Xinliang Lou, Kun Gao, Yuhang Song, Beibei Shao, Kun Li, Xinyu Wang, Dacheng Xu, Xiaohong Zhang, Yusheng Wang, Xinbo Yang, Baoquan Sun
Abstract
Abstract Wide‐bandgap metal compound‐based dopant‐free passivating contacts have been explored to fabricate crystalline silicon (Si) solar cells to mitigate the high carrier recombination rate of metal‐Si contact directly. Here, an over 4‐nm‐thick single‐layer strontium fluoride (SrF x ) and a double‐layer SrF x /lithium fluoride (LiF) films deposited by a facile vacuum thermal evaporation are developed to act as high‐performance electron‐selective contacts. SrF x with ultra‐low work function (2.8 eV) induces a strong downward band bending at the n‐type Si (n‐Si)/SrF x interface, and a dipole active layer exists at the SrF x /aluminum (Al) interface, enabling a low contact resistivity ( ρ c ) of 34.1 mΩ cm 2 and thus yielding an impressive fill factor (FF) of 82.8%. Eventually, a power conversion efficiency (PCE) of 20.1% is achieved in the SrF x ‐based solar cell. Moreover, in the n‐Si/SrF x /LiF/Al contact, the diffusion of Li in the SrF x film favors facilitating electron transport as well as relaxing its thickness restriction, inhibiting carrier recombination. And an impressive FF of 83.7% with a low ρ c of 25.9 mΩ cm 2 , an improved open‐circuit voltage of 631 mV, and a short‐circuit current density of 39.9 mA/cm 2 are attained, resulting in a champion PCE of 21.1%. Double‐layer SrF x /LiF deposited by a simple process provides a grand opportunity to fabricate low‐cost and high‐PCE photovoltaic devices.