Sustainable biocomposites from pyrolyzed lignin and recycled nylon 6 with enhanced <scp>flame retardant</scp> behavior: Studies on manufacturing and quality performance evaluation
Victoria G. Muir, Neelima Tripathi, Arturo Rodriguez‐Uribe, Amar K. Mohanty, Manjusri Misra
Abstract
Abstract The recycled nylon (RN)‐based biocomposites were fabricated by adding 25% lignin biocarbon. Lignin was pyrolyzed at 300, 600, and 900°C to produce Lig300, Lig600, and Lig900 biocarbon (BioC) samples, respectively. Higher functionality of Lig600 (unlike Lig900) allowed for improved interfacial interaction with the polar nylon matrix. Mechanical properties were further enhanced for RN_Lig600 composite with enhanced flexural and tensile strength by 18% and 8%, respectively, compared to neat polymer (RN). RN_Lig900 composite showed enhancement in tensile and flexural modulus by 32.6% and 51.1%, respectively, compared to RN. Incorporation of Lig900 in RN matrix resulted in 77.9% reduction in burning rate compared to RN. These results show the potential of lignin BioC as a filler in RN composites for flame retardant applications and mechanical enhancement, such as in the automotive industry. Highlights Effect of pyrolysis temperatures (300, 600, and 900°C) on lignin biomass. Composites prepared from recycled polyamide 6 from carpet waste and biocarbon. Improved interfacial adhesion of 600°C biocarbon with recycled nylon matrix. Enhanced thermal, mechanical properties, reduced flammability of biocomposites. Sustainable biocomposites with 900°C biocarbon reduced burning rate by 78%.