Behavior of reinforced concrete columns made with seawater and glass FRP bars and subjected to high temperatures
Abdelrahman Abushanab, Usama Ebead, Magdy Genedy, Girgis Jacoup Ghattas
Abstract
This study presents experimental and analytical investigations on the axial capacity of 12 heat-damaged glass fiber-reinforced polymer reinforced concrete columns. The columns were prepared with dimensions of 200×200×1000 mm and 3 replacement ratios of seawater for concrete mixing and curing (0%, 50%, and 100%). At the age of 3 months, the columns were subjected to an elevated temperature of 500 oC for 30, 60, and 90 minutes and subsequently cooled and tested. The experimental results demonstrated that the compressive strength of concrete increased by 35% and 45% at seawater replacement ratios of 50% and 100%, respectively. In addition, seawater-concrete mixes exhibited a lower rate of strength development compared to the reference mix. Moreover, 100% seawater concrete columns reported an increase of 28% in the cracking and ultimate loads. However, columns at seawater replacement ratios of 0%, 50%, and 100% exhibited a drop of 27%, 53%, and 50% in the cracking load after being exposed to 500 oC for 90 minutes. Additionally, the columns exposed to elevated temperatures showed a reduction of 5% to 20% in the ultimate load. Furthermore, the analytical models of ACI 440.11-22 and CAN/CSA-S806-12 significantly underestimated the axial capacity of all columns. The most accurate prediction for the columns’ axial capacity was associated with the analytical model of Mohamed et al. with mean, standard deviation, and coefficient of variance of experimental-to-predicted ratios of 1.17, 0.12, and 9.98%, respectively.