Control design and multimode power management of WECS connected to HVDC transmission line through a Vienna rectifier
Adil Mansouri, Abdelmounime El Magri, Rachid Lajouad, F. Giri
Abstract
This paper deals with nonlinear control and optimal management of wind energy conversion systems connected to HVDC transmission lines. Specifically, the energy system under study consists of a wind turbine driving a permanent magnet synchronous generator, the latter supplies energy to a power grid through a Vienna rectifier and a DC link. To compensate for intermittent nature of wind power and load demand variations, we design a voltage controller as well as a novel energy management strategy that accounts for the available wind power and DC load demands. In the considered management, distinction is made between two operation modes: i) the maximum power point tracking mode using an intelligent adaptive optimizer, where only electrical parameter measurements are used to ensure maximum power extraction; ii) the adaptive power point tracking mode employing demand-driven production. In both modes, the power factor requirement is ensured, regardless the weather conditions and load demand variations, enhancing thus the aerogenerator’s efficiency. One more novelty of the proposed control and management system is the online estimation of the DC voltage, avoiding thus the use of a physical sensor. The performances of the control and management system are highlighted by several simulations, showing the achievement all control objectives.