Busbar Current Measurement With Elliptical Sensor Arrays Without Conductor Specific Calibration
Roland Weiß, Florian Zapf, Anna Skelly, Robert Weigel
Abstract
In highly efficient power electronic systems, circular arrays of magnetic field sensors offer numerous advantages compared to older magnetic core-based sensors. They feature low power consumption, low weight, and high immunity to external magnetic fields. In power converters, conductors with a rectangular cross section, a small height, and a large width are widely used. Thus, an elliptical sensor array could reduce the space needed for the current sensor, e.g., in a power converter by a factor of four or more compared to a circular sensor array. In this work, we theoretically and experimentally study the sensitivity error caused by the change of the conductor geometry. Therefore, we calibrated different elliptical sensor arrays on a circular conductor and determined the sensitivity error for the use of flat conductors with different widths. This calibration on a circular conductor avoids a costly conductor-specific calibration of the sensor array in the application. Two different distribution methods for elliptical sensor arrays and different ratios of the semiaxes are considered. In addition, the influence of the number of sensors and the starting position for the sensors are examined. The presented elliptical sensor arrays can be used to measure the current carried by a flat conductor largely independent of its width. For some aspect ratios, they even offer a lower sensitivity error than circular sensor arrays. In this article, design considerations for those elliptic sensor arrays are given.