Effect of changing magnetite percentage on structural and magnetic properties of cobalt ferrite prepared by the sol-gel method
Atheer I. Abd Ali, Mohammed RASHEED
Abstract
The present research properly fabricated Co1−xFe2O4 nanoparticles (NPs) with a spinel structure (where x=0.3, 0.6, and 0.9, which corresponds to Co0.4Fe2O4, Co0.4Fe2O4, and Co0.4Fe2O4) via a sol-gel approach with ferric nitrate, cobalt nitrate, and citric acid as precursors are used. The powders are compressed, sintered at 1000°C for 6 hours, then calcined at 500°C for 4 hours to produce dense pellets. X-ray diffraction revealed the production of a single-phase cubic spinel structure with a favored (311) orientation, and the crystallite size is determined to be between 40 and 80 nm. Vibrating sample magnetometry (VSM) demonstrated soft magnetic behavior with low coercivity and remanence, notably for the composition of Co0.4Fe2O4 NPs. Microwave absorption characteristics determined with an X-band (8-12.5 GHz) network analyzer revealed that variations in Co content significantly affected density, porosity, and grain size, leading to changes in attenuation coefficient and scattering parameters (S11 and S21), with absorption following a Gaussian-type distribution. Furthermore, antibacterial activity as measured by the agar diffusion technique showed efficient suppression of Escherichia coli and Staphylococcus aureus, with greater activity versus the Gram-negative strain. These findings emphasize the multifunctionality of Co-doped cobalt ferrite nanomaterials.