Intensity Modulation-Normalized Calibration-Free 1<i>f</i> and 2<i>f</i> Wavelength Modulation Spectroscopy
Anirban Roy, Arup Lal Chakraborty
Abstract
This paper reports the development and validation of a field-deployable quantum cascade laser-based tunable diode laser spectroscopy (TDLS) sensor for in situ measurement of atmospheric CO and CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> using a new calibration-free 1f and 2f wavelength modulation spectroscopy (WMS) method. The 1f WMS and 2f WMS signals are normalized by the linear and non-linear intensity modulation components respectivelyto make the signals immune to laser intensity variations. The advantage of this method is that the normalized signals appear on a background that is independent of the laser parameters. The error in mole fraction extraction is 0.2% and 0.98% for CO and CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> respectively. The system has a single-pass detection limit of 3 ppb for CO (using 1f WMS and 4.05 m path length) and 45 ppb for CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> (using 2f WMS and 20 cm path length) for an optimum integration time of 17 s and 69 s respectively. These values correspond to normalized detection limits of 12 ppb-m for CO and 9 ppb-m for CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> . The mean mole fraction of CO and CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> measured in Gandhinagar, India from 19-25 July 2019 were found to be 477 ± 32 ppb and 486 ± 29 ppm respectively. These measurements demonstrate that this WMS algorithm and the sensor system are suitable for accurate long-term monitoring of greenhouse gases and air pollutants.