Chemomechanical effects of oxidizer‐ <scp> CO <sub>2</sub> </scp> systems upon hydraulically fractured unconventional source rock
Katherine L. Hull, Younane Abousleiman
Abstract
Abstract Carbon dioxide (CO 2 ) as supercritical (scCO 2 ) or foamed (CO 2 ‐Foam) fluid has been tested many times as a fracturing fluid, though it has not yet proven viable. Many challenges have been identified with scCO 2 as a fracturing fluid, including poor additive solubility, low viscosity, and limited accessibility. However, CO 2 is known to adsorb to organic matter (OM) and displace methane (i.e., enhanced coal bed methane [ECBM] operations), or to mobilize oil as in tertiary enhanced oil recovery. In this study we augment the efficacy of the kerogen control fluid (KCF) for stimulating unconventional rock formations by alternating aqueous oxidizing fracturing fluid with CO 2 injection or by combining oxidizers directly with CO 2 as a new additive. To this end, KCF‐CO 2 tests were designed to treat OM and extend the depth of permeability enhancement. We report the first attempt to combine oxidizer with CO 2 in the presence of source shale rocks at elevated temperature and pressure. Scanning electron microscopy imaging of the treated shale sample surfaces demonstrate potential porosity and permeability enhancement, though some mineral and organic deposits are also observed, which may prove to be detrimental. Meanwhile, alternating water‐based KCF with CO 2 provides a potential improvement to the KCF as predicted by early lab results on OM. The KCF‐CO 2 concept has no equivalent to date in unconventional hydraulic fracturing operations. This technology will contribute to reducing the footprint of anthropogenic CO 2 and enhancing its permanent sequestration in unconventional stimulated reservoirs, compliant with our global clean energy initiative of carbon capture, utilization, and storage.