Litcius/Paper detail

Ultra-Highly Sensitive Ammonia Detection Based on Light-Induced Thermoelastic Spectroscopy

Yao Mi, Yufei Ma

2021Sensors17 citationsDOIOpen Access PDF

Abstract

This invited paper demonstrated an ultra-highly sensitive ammonia (NH3) sensor based on the light-induced thermoelastic spectroscopy (LITES) technique for the first time. A quartz tuning fork (QTF) with a resonance frequency of 32.768 kHz was employed as a detector. A fiber-coupled, continuous wave (CW), distributed feedback (DFB) diode laser emitting at 1530.33 nm was chosen as the excitation source. Wavelength modulation spectroscopy (WMS) and second-harmonic (2f) detection techniques were applied to reduce the background noise. In a one scan period, a 2f signal of the two absorption lines located at 6534.6 cm−1 and 6533.4 cm−1 were acquired simultaneously. The 2f signal amplitude at the two absorption lines was proved to be proportional to the concentration, respectively, by changing the concentration of NH3 in the analyte. The calculated R-square values of the linear fit are equal to ~0.99. The wavelength modulation depth was optimized to be 13.38 mA, and a minimum detection limit (MDL) of ~5.85 ppm was achieved for the reported NH3 sensor.

Topics & Concepts

Detection limitPhotoacoustic spectroscopyThermoelastic dampingSpectroscopyWavelengthDetectorMaterials scienceSIGNAL (programming language)LaserModulation (music)OpticsAbsorption spectroscopyAbsorption (acoustics)DiodeTime delay and integrationHarmonicAnalyteTuning forkAnalytical Chemistry (journal)Frequency modulationOptoelectronicsChemistryVibrationAcousticsPhysicsRadio frequencyTelecommunicationsThermalQuantum mechanicsComputer sciencePhysical chemistryMeteorologyProgramming languageChromatographySpectroscopy and Laser ApplicationsAdvanced Chemical Sensor TechnologiesAtmospheric Ozone and Climate
Ultra-Highly Sensitive Ammonia Detection Based on Light-Induced Thermoelastic Spectroscopy | Litcius