Litcius/Paper detail

High-power near-infrared QEPAS sensor for ppb-level acetylene detection using a 28 kHz quartz tuning fork and 10 W EDFA

Zhifei Yang, Haoyang Lin, Baiyang Antonio Zhou Montano, Wenguo Zhu, Yongchun Zhong, Bin Yuan, Jianhui Yu, Ruifeng Kan, Min Shao, Huadan Zheng

2022Optics Express22 citationsDOIOpen Access PDF

Abstract

A high-power near-infrared (NIR) quartz enhanced photoacoustic spectroscopy (QEPAS) sensor for part per billion (ppb) level acetylene (C 2 H 2 ) detection was reported. A 1536 nm distributed feedback (DFB) diode laser was used as the excitation light source. Cooperated with the laser, a C-band 10 W erbium-doped fiber amplifier (EDFA) was employed to boost the optical excitation power to improve QEPAS detection sensitivity. A pilot line manufactured quartz tuning fork (QTF) with a resonance frequency of 28 kHz was used as the photoacoustic transducer. In the case of high excitation power, gas flow effect and temperature effect were found and studied. Benefitting from the low QTF resonance frequency, high excitation power, and vibrational-translational (V-T) relaxation promoter, a detection limit of ∼7 ppb was achieved for C 2 H 2 detection, corresponding to a normalized noise equivalent absorption coefficient of 4.4×10 −8 cm −1 · W · Hz −1/2 .

Topics & Concepts

Materials sciencePhotoacoustic spectroscopyOpticsAmplifierDetection limitLaserPhotoacoustic effectOptoelectronicsResonance (particle physics)Parts-per notationChemistryPhysicsCMOSParticle physicsOrganic chemistryChromatographySpectroscopy and Laser ApplicationsAtmospheric Ozone and ClimateAtmospheric and Environmental Gas Dynamics
High-power near-infrared QEPAS sensor for ppb-level acetylene detection using a 28 kHz quartz tuning fork and 10 W EDFA | Litcius