Experimental and numerical investigation of the bending fatigue performance of symmetric and asymmetric polymer gears
A Karthik Pandian, Sachin Singh Gautam, S. Senthilvelan
Abstract
In this work, the bending fatigue strengths of injection-molded symmetric and asymmetric nylon 66 gears were evaluated experimentally, and the results were substantiated using numerical studies. The symmetric (20°/20°) and asymmetric (34°/20° and 20°/34°) configurations were subjected to bending fatigue tests under a load controlled mode. The bending stresses of the symmetric and asymmetric gears were predicted by quasi-static simulations using a commercial finite element analysis software. The form factor ([Formula: see text]) and the stress correction factor ([Formula: see text]) were computed using an adapted ISO method. The 34°/20° configuration exhibited the lowest bending stress and highest bending fatigue life among the tested configurations. The form factor exerted a decisive influence on the magnitude of the bending stress compared to the stress correction factor. For the considered loading conditions, deflection-induced load sharing occurred in the 20°/20° and 20°/34° configurations but was absent in the 34°/20° configuration. Failure analysis indicated that a high stress concentration caused multiple cracks in the fillets of asymmetric gears.