Correlating the Valence State with the Adsorption Behavior of a Cu‐Based Electrocatalyst for Furfural Oxidation with Anodic Hydrogen Production Reaction
Ming Yang, Yingying Li, Chung‐Li Dong, Shengkai Li, Leitao Xu, Wei Chen, Jingcheng Wu, Yuxuan Lu, Yuping Pan, Yandong Wu, Yongxiang Luo, Yucheng Huang, Shuangyin Wang, Yuqin Zou
Abstract
Abstract The low‐potential furfural oxidation reaction (FFOR) on a Cu‐based electrocatalyst can produce H 2 at the anode, thereby providing a bipolar H 2 production system with an ultralow cell voltage. However, the intrinsic activity and stability of the Cu‐based electrocatalyst for the FFOR remain unsatisfactory for practical applications. This study investigates the correlation between the valence state and the adsorption behavior of the Cu‐based electrocatalyst in furfural oxidation. Cu 0 is the adsorption site with low intrinsic activity. Cu + , which exists in the form of Cu(OH) ads in alkaline electrolytes, has no adsorption ability but can improve the performance of Cu 0 by promoting the adsorption of FF. Moreover, a mixed‐valence Cu‐based electrocatalyst (MV Cu) with high intrinsic activity and stability is prepared electrochemically. With the MV Cu catalyst, the assembled dual‐side H 2 production electrolyzer has a low electricity requirement of only 0.24 kWh m H2 −3 at an ultralow cell voltage of 0.3 V, and it exhibits sufficient stability. This study not only correlates the valence state with the adsorption behavior of the Cu‐based electrocatalyst for the low‐potential FFOR with anodic H 2 production but also reveals the mechanism of deactivation to provide design principles for Cu‐based electrocatalysts with satisfactory stability.