Engraving Polyamide Layers by <i>In Situ</i> Self-Etchable CaCO<sub>3</sub> Nanoparticles Enhances Separation Properties and Antifouling Performance of Reverse Osmosis Membranes
Li Long, Hao Guo, Lingyue Zhang, Qimao Gan, Chenyue Wu, Shenghua Zhou, Lu Elfa Peng, Chuyang Y. Tang
Abstract
Nanovoids within a polyamide layer play an important role in the separation performance of thin-film composite (TFC) reverse osmosis (RO) membranes. To form more extensive nanovoids for enhanced performance, one commonly used method is to incorporate sacrificial nanofillers in the polyamide layer during the exothermic interfacial polymerization (IP) reaction, followed by some post-etching processes. However, these post-treatments could harm the membrane integrity, thereby leading to reduced selectivity. In this study, we applied in situ self-etchable sacrificial nanofillers by taking advantage of the strong acid and heat generated in IP. CaCO 3 nanoparticles (nCaCO 3 ) were used as the model nanofillers, which can be in situ etched by reacting with H + to leave void nanostructures behind. This reaction can further degas CO 2 nanobubbles assisted by heat in IP to form more nanovoids in the polyamide layer. These nanovoids can facilitate water transport by enlarging the effective surface filtration area of the polyamide and reducing hydraulic resistance to significantly enhance water permeance. The correlations between the nanovoid properties and membrane performance were systematically analyzed. We further demonstrate that the nCaCO 3 -tailored membrane can improve membrane antifouling propensity and rejections to boron and As(III) compared with the control. This study investigated a novel strategy of applying self-etchable gas precursors to engrave the polyamide layer for enhanced membrane performance, which provides new insights into the design and synthesis of TFC membranes.