Tuning dual three‐dimensional porous copper/graphite composite to achieve diversified utilization of copper current collector for lithium storage
Xia Ma, Zhijia Zhang, Jia-Min Wang, Shi-Hao Sun, Shao-Fei Zhang, Shen Yuan, Zhijun Qiao, Zhen-Yang Yu, Jian-Li Kang, Weijie Li
Abstract
Abstract Graphite anode materials are widely used in commercial lithium‐ion batteries; however, the long electron/ion transportation path restricted its high energy storage. In this experiment, we designed a copper/graphite composite with a dual three‐dimensional (3D) continuous porous structure combining used nonsolvent‐induced phase separation and heat treatment, in which a large amount of graphite is embedded in the 3D porous copper/carbon architecture. In the novel structure, not only the electron and Li + transmission performances are improved, but also the space of current collector is fully utilized. Meanwhile, carbonized polyacrylonitrile network stabilizes the interface between graphite and copper matrix. The obtained copper/graphite composite anode has an initial discharge capacity of 524.6 mAh·g −1 , a holding capacity of 350 mAh·g −1 and excellent cycle stability (299.3 mAh·g −1 after 180 cycles at 0.1C rate), exhibiting good electrochemical performance. The experimental results show that the mass loading of the copper/graphite composite electrode material is about 4.39 mg·cm −2 . We also envisage replacing graphite with other high‐capacity active materials to fill the current collector, which can provide a reference for the future development of next‐generation advanced electrodes.