Strength Characteristics of Geopolymer Synthetic Sand Using Fly Ash
Pupalwad Arti Sudam, M. Heeralal, Kadali Srinivas
Abstract
Sand is a naturally available resource that has numerous applications in civil engineering. Due to a rapid increase in construction activities and exploitation of natural resources, there has been a scarcity of natural river sand (NRS), causing environment related issues such as erosion of riverbanks and the lowering of the water table. Hence, there is a need to identify and process sustainable alternative granular materials such as geopolymer synthetic sand (GPSS). In this connection, an attempt has been made for the effective utilization of fly ash in the synthesis of granular materials through geopolymerization. Geopolymer synthetic sand was prepared using 12 M NaOH solution at 100°C for 1 h and the granules produced were used as an alternative for natural river sand. The granulated materials were characterized by their physical properties [specific gravity, water absorption, grain size distribution, specific surface area, and scanning electron microscope (SEM)], chemical properties [pH, electrical conductivity (EC), total dissolved solids (TDS), and cation exchange capacity (CEC)], engineering properties (cohesion, angle of shearing resistance, optimum moisture content and maximum dry density, and hydraulic conductivity), mineralogical properties [X-ray diffraction (XRD)], and thermal properties [thermogravimetric analysis (TGA) and differential thermal analysis (DTA)]. In addition, compressive strength tests were performed on GPSS and NRS mortar. It was noted that GPSS mortar attained similar strength as NRS mortar. Based on the experimental investigations and microanalysis, it can be concluded that GPSS granules have the potential for use as an alternative to natural river sand.