Micro crystalline cellulose aided surface modification and deposition of green polyelectrolytes for the improved hydrophilicity and flame retardancy of polyamide 66 fabric
Chanchal Kumar Kundu, Lei Song, Yuan Hu
Abstract
In this work, microcrystalline cellulose (MCC) treated polyamide 66 (PA66) textiles were coated with green and naturally abundant polysaccharides specifically, chitosan (CS) and sodium alginate (SA) together with phytic acid (PA) via layer by layer (LbL) deposition. The prime focus of such treatment was to intensify both the hydrophilic and flame retardant properties of PA66 fabric substrates. Subsequently, the prepared coatings were further subjected to cross-linking modification by dipping them into the barium (Ba) salt solution. Obtained results indicated that the MCC-modified PA66 exhibited a water contact angle (WCA) value of 0 0 and revealed a drop in peak heat release rate (pHRR) up to 31 % with complete suppression of melt-dripping. Meanwhile, the Ba-ion-induced cross-linking treatment further escalated this reduction up to 36 % by adding enhanced thermal stability, improved char quality along better wash durability of as prepared coatings. In addition, the combined modification of PA66 textiles with MCC and Ba-ion handed a superb enhancement of physical properties like tensile strength by ca. 50 % compared to the pure PA66. Thus, this MCC-assisted surface modification paves the way for a new kind of greener treatment of PA66 textiles in attaining superior hydrophilic and flame retardant properties of the same.