Exploring Oxytenanthera abyssinica as a sustainable alternative for pulp and paper production: A response surface methodology approach for optimized soda pulping
Limenew Abate Worku, Rakesh Kumar Bachheti, Mesfin Getachew Tadesse, Archana Bachheti, Abdulrahman Alshammari, Norah A. Albekairi, Atul Kabra, Woinshet Kassie Alemu
Abstract
Oxytenanthera abyssinica has been investigated as a possible substitute raw material for pulp and paper production because of its long fiber (2.40 mm), larger fiber width (21.83 μm), and flexibility ratio (0.72), smaller Runkel ratio (0.35), large slenderness ratio (109.98), and thinner cell wall thickness (2.74 μm). A response surface methodology (RSM) method was applied to explore and identify the best conditions for soda processing of the O. abyssinica stem. Soda concentration, cooking temperature, and cooking time were used to optimize the process of pulp production and the Kappa number (KPN). Under optimal conditions such as 180 min cooking time, 20 % active alkali, and 165 °C cooking temperature, the highest pulp yield and the lowest KPN were 43.48 % and 19.9, respectively. The optimized pulp was used to make a paper sheet having mechanical characteristics of the tensile index (28.23 Nm/g), tearing index (10.70 mNm 2 /g), and Burst index (1.11 kPam 2 /g). This study demonstrates that O. abyssinica pulp can produce paper with mechanical properties of medium strength equivalent to that of paper using a more environmentally friendly pulping process such as soda pulping compared to kraft and sulfite pulping. In summary, it can be inferred that O. abyssinica holds significant promise as a substitute raw material for pulp and paper industries. However, it is recommended to conduct pilot plant studies for further exploration.