Experimental investigation on 4D printed intelligent assembly cushion with adjustable pre-tightening force
Tengjie Li, Jian Li, Xicheng Huang
Abstract
Abstract In order to design an intelligent assembly cushion with an adjustable pre-tightening force, a reentrant honeycomb structure was printed by additive manufacturing to realize the active and intelligent assembly process of filling gaps. The thermo-mechanical deformation experiments of the reentrant honeycomb structure were conducted at different pre-compressions, constrained displacements, and recovery temperatures. The recovery force and the force recovery ratio under semi-constrained conditions are explored emphatically. The results show that pre-compression, constrained displacement, and recovery temperature affect the recovery force and force recovery ratio under semi-constrained conditions. The recovery force and force recovery ratio increase with pre-compression, decrease with constrained displacement, and increase with recovery temperature below the glass transition temperature. Based on these results, the adjustability of the recovery force of a reentrant honeycomb cushion can be controlled by changing the thermo-mechanical deformation processes. Finally, the reentrant honeycomb cushion is applied to the mimetic assembly environment for corresponding testing, achieving the design of an active and intelligent assembly cushion with an adjustable pre-tightening force.