GaN Drift Layers on Sapphire and GaN Substrates for 1.2 kV Class Vertical Power Devices
Frank Brunner, Enrico Brusaterra, Eldad Bahat‐Treidel, Oliver Hilt, M. Weyers
Abstract
The development of processes for epitaxial growth of vertical gallium nitride (GaN) drift layers enabling 1.2 kV breakdown voltage on low‐cost sapphire substrates is presented in comparison to GaN bulk substrates. The targeted blocking capability demands drift layers with a thickness of 10 μm and low but controllable n‐type doping. Using a growth rate of 2.5 μm h −1 the concentration of unintentionally incorporated carbon is sufficiently low to adjust the n‐type carrier concentration to ≈1 × 10 16 cm −3 for all types of substrates. To assess GaN drift region properties in terms of forward bias conductivity and reverse bias blocking strength, a quasi‐vertical p‐n‐diode structure is utilized. Bow reduction of GaN‐on‐sapphire structures is achieved using a stealth laser scribing process. Breakdown voltages higher than 1600 V and a specific on‐state resistance as low as 0.7 mΩ cm 2 are obtained with diodes fabricated on GaN substrates. Similar structures grown on sapphire show breakdown voltages of about 1300 V due to higher levels of current leakage. Comparing different types of substrates, a direct correlation between dislocation density in the drift layer with the leakage current in p‐n diodes is deduced.