A Multi-Band 16–52-GHz Transmit Phased Array Employing 4 × 1 Beamforming IC With 14–15.4-dBm <i>P</i> <sub>sat</sub> for 5G NR FR2 Operation
Abdulrahman Alhamed, Gökhan Gültepe, Gabriel M. Rebeiz
Abstract
This article introduces a millimeter-wave (mm-wave) multi-band transmit (Tx) phased-array design supp- orting the fifth-generation (5G) new radio frequency range 2 (NR FR2) bands. An eight-element phased-array module is presented employing two wideband 16–52 GHz <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$4{\times }1$ </tex-math></inline-formula> Tx beamformer chips and tapered slot Vivaldi antenna array. The beamformer chips are designed in a SiGe BiCMOS process and flipped on a printed circuit board (PCB). The SiGe integrated circuit (IC) has four differential radio frequency (RF) beamforming channels each consisting of an active balun, analog adder-based phase shifter (PS), variable gain amplifier (VGA), and a two-stage class-AB power amplifier (PA). The RF input signal is distributed to the four channels using a compact Wilkinson network. The measured peak gain is 28.3 dB with 13.5–14.7 dBm output <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$P_{1{\mathrm {dB}}}$ </tex-math></inline-formula> and 14–15.4 dBm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$P_{{\mathrm {sat}}}$ </tex-math></inline-formula> at 20–50 GHz. Each channel dissipates 250 mW from 2 V and 3-V supplies at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$P_{1\,{\mathrm{ dB}}}$ </tex-math></inline-formula> . The beamformer chip is tested using 64-QAM waveforms and achieves a data rate of 2.4 Gb/s at 5.2% rms EVM and 9.6-dBm average power. The eight-element phased-array module shows a broadband performance with excellent patterns and ±60° scanning capability and with a peak effective isotropic radiated power (EIRP) of 32–34 dBm at 19.5–51 GHz. At an EIRP of 21–22 dBm, 400-MHz 256-QAM 5G-NR compliant waveforms are transmitted with < 2.98% EVM demonstrating 5G NR FR2 operation. To the author’s knowledge, this work achieves the highest bandwidth phased array with a peak EIRP of 34 dBm enabling the construction of multi-standard/multi-band 5G phased-array systems.