Energy, Exergy, Exergoeconomic, and Exergoenvironmental Assessment of Flash-Binary Geothermal Combined Cooling, Heating and Power Cycle
Moein Shamoushaki, M.A. Ehyaei, Farhad Taghizadeh–Hesary
Abstract
This research presents the energy, exergy, economic, and environmental assessment, and multi-objective optimization of a flash-binary geothermal CCHP cycle. A sensitivity analysis of production well inlet temperature and cooling to power flow ratio on exergetic, economic, and environmental parameters was conducted. Furthermore, the effects of the inflation rate and plant working hours on economic parameters were investigated. Results showed that increasing the production well inlet temperature harms exergy efficiency and exergetic performance criteria and results in a gain in exergo-environmental impact index and heating capacity. In addition, the total plant cost increased by raising the production well temperature. Furthermore, increasing the cooling to power flow ratio caused a reduction in exergy efficiency, exergetic performance criteria, and produced net power and an enhancement in exergy destruction, cooling capacity, and total plant cost. The exergy efficiency and total cost rate in the base case were 58% and 0.1764, respectively. Optimization results showed that at the selected optimum point, exergy efficiency was 4.5% higher, and the total cost rate was 10.3% lower than the base case. Levelized cost of energy and the pay-back period at the optimum point was obtained as 6.22 c$/kWh, 3.43 years, which were 5.14% and 6.7% lower than the base case.