Well‐Dispersed MOF‐5 on The Polyvinylpyrrolidone‐Coated Random Lamellas of Clinoptilolites for Adsorptive Separation Performance of CO<sub>2</sub>, CH<sub>4</sub>, and N<sub>2</sub>
Jiawei Zhou, Ming Liu, Shiyang Bai, Jihong Sun, Jia Wei, Ju Wang
Abstract
Abstract The MOF‐5@clinoptilolite (MOF@CP) composites are successfully synthesized using polyvinylpyrrolidone (PVP) for adsorption separation of CO 2 /CH 4 , CO 2 /N 2 , and CH 4 /N 2 . The effects of the PVP amounts on the dispersity of MOF‐5 on CP random lamellas of the MOF@CPs are evaluated via various characterizations. Meanwhile, their single‐component gas adsorption isotherms, breakthrough experiments, and cycling test are measured. The results elucidate that the used PVP amount has a significant influence on the particle size and the uniformity of MOF‐5 dispersed on CP random lamellas. The MOF‐5‐loaded amount in MOF@CP is estimated to be up to 42.52 wt.%. Especially, the surface fractal evolutions indicated the surfaces of MOF@CP became from rough to smooth with the increase of PVP. The CO 2 /CH 4 , CO 2 /N 2 , and CH 4 /N 2 selectivity factors of MOF@CP are higher than that of CP, displaying a better separation performance. Their cycling test revealed that MOF@CPs could be used repetitively, highlighting efficiency for CO 2 and CH 4 separation. Meanwhile, the MOF‐5@CP stability under moisture is preliminarily investigated, showing higher moisture resistance stability than MOF‐5. Additionally, the grand canonical Monte Carlo simulations demonstrated the adsorption separation mechanism of the prepared MOF@CPs.