Litcius/Paper detail

A 0.25–0.4-V, Sub-0.11-mW/GHz, 0.15–1.6-GHz PLL Using an Offset Dual-Path Architecture With Dynamic Charge Pumps

Zhao Zhang, Guang Zhu, C. Patrick Yue

2020IEEE Journal of Solid-State Circuits18 citationsDOI

Abstract

This article presents an ultra-low-voltage phase-locked loop (ULVPLL) with the minimum supply voltage at 0.25 V. The offset dual-path loop architecture is proposed to relax the charge pump (CP) current matching requirement. Thus, no current mismatch suppression technique is required. This significantly mitigates the CP design challenges at such low supply voltage. In the two proposed dynamic CPs (DCPs), all the current sources, current mirrors, and op amps in the prior CPs are eliminated. Hence, the CP voltage headroom requirement is relaxed to make the DCP be suitable for sub-0.3-V operation; meanwhile, the CP power consumption and circuit design complexity are simultaneously reduced. Implemented in 40-nm CMOS with core area of 0.00873 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , the 0.15-1.6-GHz ULVPLL is capable of operation under a 0.25-0.4-V supply voltage. The power efficiency is 0.106 mW/GHz from 1.6-GHz output (at 0.4-V supply) and 0.048 mW/GHz from 0.2 GHz (at 0.25-V supply). Measured spur level is -58.3 dBc at 100-MHz offset from 1.6-GHz output (at 0.4-V supply) and -48.5 dBc at 12.5-MHz offset from 200-MHz output (at 0.25-V supply).

Topics & Concepts

dBcCMOSOffset (computer science)VoltageElectrical engineeringCharge pumpPhase-locked loopPhysicsMaterials scienceOptoelectronicsComputer sciencePhase noiseEngineeringCapacitorProgramming languageAdvancements in PLL and VCO TechnologiesRadio Frequency Integrated Circuit DesignAnalog and Mixed-Signal Circuit Design
A 0.25–0.4-V, Sub-0.11-mW/GHz, 0.15–1.6-GHz PLL Using an Offset Dual-Path Architecture With Dynamic Charge Pumps | Litcius