Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co<sub>0.2</sub>Zn<sub>0.8</sub>O-Sm<sub>0.20</sub>Ce<sub>0.80</sub>O<sub>2−δ</sub> Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell
Sajid Rauf, M.A.K. Yousaf Shah, Bin Zhu, Zuhra Tayyab, Nasir Ali, Sanam Attique, Xia Chen, Rabia Khatoon, Changping Yang, Muhammad Imran Asghar, Peter D. Lund
Abstract
Semiconductor heterostructures offer a high ionic conduction path enhanced by built-in electric field at the interface, which helps to avoid electronic conduction in low-temperature solid oxide fuel cells (LT-SOFCs). In this study, we synthesized a semiconductor heterostructure based on Co-doped ZnO and Sm0.2Ce0.8O2–δ (SDC) for LT-SOFC application. First, we optimized the composition of the Co-doped ZnO by varying the doping concentration. The cell with Co0.2Zn0.8O composition (σi = 0.158 S cm–1) yielded the best performance of 664 mW cm–2 at 550 °C. This optimized composition of Co-doped ZnO was mixed with a well-known ionic conductor Sm0.2Ce0.8O2−δ (SDC) to further improve the ionic conductivity and performance of the cell. The heterostructure formed between these two semiconductor materials improved the ionic conductivity of this composite material to 0.24 S cm–1 at 550 °C, which is 2 orders higher in magnitude than that of bulk SDC. The fuel cells fabricated with this promising semiconductor-ionic heterostructure material produced an outstanding power density of 928 mW cm–2 at 550 °C. Our further investigation shows protonic conduction (H+) in the Co0.2Zn0.8O-SDC composite, which exhibited protonic conduction 0.088 S cm–1 with a power density of 388 mW cm–2 at 550 °C. A detailed characterization of the material and the fuel cells is performed with the help of different electrochemical (electrochemical impedance spectroscopy (EIS)), spectroscopic (X-ray diffraction (XRD), UV–vis spectroscopy, X-ray photoelectron spectroscopy (XPS)), and microscopic techniques (scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectrometry (EDX)). The stability of the cell was tested for 35 h to ensure stable operation of these devices. This semiconductor-ionic heterostructure composite provides insight into the development of electrolyte membranes for advanced SOFCs.