An Over-Modulated Model Predictive Current Control for Permanent Magnet Synchronous Motors
Feng Yu, Kaikai Li, Zhihao Zhu, Xing Liu
Abstract
To improve the voltage utilization rate of DC bus and reduce the voltage vector tracking error, a finite-control-set modulated model predictive control (FCS-M2PC) with overmodulation capacity for permanent magnet synchronous motor (PMSM) incorporating penalty function is proposed in this paper. Firstly, three modulation regions are determined according to the combined action of dead-beat control and model predictive control (MPC). Secondly, three, two and one voltage vectors are applied to linear modulation region (LMR), overmodulation region I (OMR-I) and overmodulation region II (OMR-II), respectively, to synthesize the reference voltage vector. Thirdly, to obtain better steady-state performance in the whole modulation region, the optimal vector dwell-times can be obtained from the uniform penalty function defined by a set of mode parameters to minimize the error between the current references and the current predictions, rather than applying a single voltage vector in the conventional finite-control-set model predictive control (FCS-MPC). The effectiveness and superiority of the proposed method are validated experimentally.