Inkjet‐Printed MoS<sub>2</sub> Transistors with Predominantly Intraflake Transport
Sandeep Kumar Mondal, Ananya Biswas, Jyoti Ranjan Pradhan, Subho Dasgupta
Abstract
Abstract 2D semiconductors, such as transition metal dichalcogenides (TMDs) show a rare combination of physical properties that include a large‐enough bandgap to ensure sufficient current modulation in transistors, matching electron and hole mobility for complimentary logic operation, and sufficient mechanical flexibility of the nanosheets. Moreover, the solvent‐exfoliated TMD‐nanosheets may also be processed at low temperatures and onto a wide variety of substrates. However, the poor inter‐flake transport in solution‐cast 2D‐TMD network transistors hinders the realization of high device mobility and current modulations that the intraflake transistors can regularly demonstrate. In this regard, fully printed and electrolyte‐gated, narrow‐channel MoS 2 field‐effect transistors (FETs) with simultaneous high current saturation (>310 µA µm −1 ) and on–off ratio (>10 6 ) are proposed here. The transport limitation is overcome by printing an additional metal layer onto the 2D‐TMD nanosheet channel, which substantially shortens the effective channel lengths and results in predominant intraflake transport. In addition, a channel‐capacitance‐modulation induced subthermionic transport is recorded, which leads to a subthreshold slope value as low as 7.5 mV dec −1 . On the other hand, thermionic MOSFETs and fully printed depletion‐mode NMOS inverters are also presented. The demonstrated generic approach involving chemically exfoliated nanosheet inks and the absolute device yield indicates the feasibility of fully printed 2D‐TMD electronics.