Behavior of Insulating Particles in an Electrostatic Separator Associated With a New Spiral-Type Tribocharger
Mohammed Rezoug, Mohamed Fodil Boukhoulda, Seddik Touhami, Wessim Aksa, Karim Medles, Lucian Dăscălescu
Abstract
Electrostatic separation processes are emerging as the solution of choice for recycling waste from end-of-life equipment in various industries. The separation of the different constituents of such plastic mixtures is the key to successful recycling. The main objective of this work was the development of a new spiral-type tribocharging device with application in the field of electrostatic separation. The spiral charger offers a very high charging rate compared to other triboelectric systems. It favors collisions of the particles with the inner wall, which is very efficient to separate a mixture of ternary particles. The study was conducted with samples of various medium-sized (2–5 mm) granular plastics, for several values of air velocity, pipe length, and particle mass in the turbocharging device. The spiral charger was associated with a belt-type electrostatic separator to process a granular insulating mixture, consisting of three types of plastic products Polyvinyl Chloride, Polypropylene, and Polystyrene. This work also aims at numerically simulating the dynamic behavior of insulating particles in belt-type electrostatic separators. The good separation obtained for this ternary mixture shows the efficiency of the new tribocharger.