Measurement of Electrophysiological Signals In Vitro Using High‐Performance Organic Electrochemical Transistors
James E. Tyrrell, Martyn G. Boutelle, Alasdair J. Campbell
Abstract
Abstract Biological environments use ions in charge transport for information transmission. The properties of mixed electronic and ionic conductivity in organic materials make them ideal candidates to transduce physiological information into electronically processable signals. A device proven to be highly successful in measuring such information is the organic electrochemical transistor (OECT). Previous electrophysiological measurements performed using OECTs show superior signal‐to‐noise ratios than electrodes at low frequencies. Subsequent development has significantly improved critical performance parameters such as transconductance and response time. Here, interdigitated‐electrode OECTs are fabricated on flexible substrates, with one such state‐of‐the‐art device achieving a peak transconductance of 139 mS with a 138 µs response time. The devices are implemented into an array with interconnects suitable for micro‐electrocorticographic application and eight architecture variations are compared. The two best‐performing arrays are subject to the full electrophysiological spectrum using prerecorded signals. With frequency filtering, kHz‐scale frequencies with 10 µV‐scale voltages are resolved. This is supported by a novel quantification of the noise, which compares the gate voltage input and drain current output. These results demonstrate that high‐performance OECTs can resolve the full electrophysiological spectrum and suggest that superior signal‐to‐noise ratios could be achieved in high frequency measurements of multiunit activity.