Fit of <scp>tooth‐supported</scp> zirconia single crowns—A systematic review of the literature
Walaa Magdy Ahmed, Batoul Shariati, Arwa Z. Gazzaz, Mohammed E. Sayed, Ricardo M. Carvalho
Abstract
PURPOSE: The purpose of this study is to systematically map all the factors that influence the fit and adaptation of zirconia crowns and/or copings. MATERIALS AND METHODS: The investigational strategy involved carrying out an electronic search between December 1, 2009 and September 1, 2019 through the Embase and Medline databases using Boolean operators to locate appropriate articles. RESULTS: A total of 637 articles were discovered after the removal of duplicates, and 46 of these were selected for evaluation. Further, a quality assessment was performed using GRADE evaluation criteria. CONCLUSIONS: Shoulder finish line preparations had slightly better marginal fit compared to chamfer finish lines. Crowns obtained from digital impressions had comparable to superior marginal adaptation compared to conventional impressions. Increasing cement space showed to improve zirconia crown adaptation. Cementation and veneering zirconia frameworks found to increase the marginal and internal gaps. Limited information is available on the effect of the alteration of sintering time/Temperature and/or sintering techniques on the adaptation of zirconia crowns. Most of the selected studies had a moderate quality assessment evaluation. Future studies could investigate the chair-side, ultra-fast sintering effect on the marginal gap of zirconia crowns.