CFD–DEM Simulation of Heat Transfer and Reaction Characteristics of Pyrolysis Process of MSW Heated by High-Temperature Flue Gas
Meng Wang, Tianyuan Jia, Xiaoan Song, Lijie Yin, Dezhen Chen, Kezhen Qian
Abstract
Pyrolysis is a promising disposal method for municipal solid waste (MSW) due to the high-value utilization of the organic components of MSW. Traditional indirect heating has low heat transfer efficiency and requires an increase in the heat exchange area. In this study, a refined numerical simulation model for the pyrolysis of four typical MSW components with high-temperature flue gas was established to study the influence of flue gas on the heat transfer and reaction characteristics of MSW. The temperature distribution and particle size change in different components were obtained, and the effects of flue gas temperature and velocity on the pyrolysis process were analyzed. It was found that the temperature difference of the four components along the bed height direction was about 1.36–1.81 K/mm, and the energy efficiency was about 55–61%. When the four components were uniformly mixed, the temperature increase rates of each component were similar during the pyrolysis process. As the flue gas temperature increased, the amount of gas consumption decreased and the energy efficiency increased. When the flue gas velocity increased, the flue gas consumption increased and the energy efficiency decreased. The research results are of great significance for the promotion and application of pyrolysis technology to MSW with high-temperature flue gas.