Anisotropic damage behavior in fiber-based materials: Modeling and experimental validation
Mossab Alzweighi, Johan Tryding, Rami Mansour, Eric Borgqvist, Artem Kulachenko
Abstract
This study presents a thermodynamically consistent continuum damage model for fiber-based materials that combines elastoplasticity and damage mechanisms to simulate the nonlinear mechanical behavior under in-plane loading. The anisotropic plastic response is characterized by a non-quadratic yield surface composed of six sub-surfaces, providing flexibility in defining plastic properties and accuracy in reproducing material response. The damage response is modeled based on detailed uniaxial monotonic and cyclic tension-loaded experiments conducted on specimens extracted from a paper sheet in various directions. To account for anisotropic damage, we propose a criterion consisting of three sub-surfaces representing tension damage in the in-plane material principal directions and shear direction, where the damage onset is determined through cyclic loading tests. The damage evolution employs a normalized fracture energy concept based on experimental observation, which accommodates an arbitrary uniaxial loading direction. To obtain a mesh-independent numerical solution, the model is regularized using the implicit gradient enhancement by utilizing the linear heat equation solver available in commercial finite-element software. The study provides insights into the damage behavior of fiber-based materials, which can exhibit a range of failure modes from brittle-like to ductile, and establishes relationships between different length measurements.