Feldspar-banana peel composite adsorbent for efficient crude oil removal from solution
Folasegun A. Dawodu, Chika J. Abonyi, Kovo G. Akpomie
Abstract
Abstract The problem of oil spill pollution associated with the transport of crude oil and its products across the globe is of serious concern. The sorption technique has proved to be promising for oil spill treatment but is limited by the hydrophilic nature of most natural organic sorbents. The combo of natural organic and inorganic sorbents have been found to enhance the hydrophobicity for oil sorption. Therefore this study was aimed at the preparation of a novel feldspar-banana peel biochar composite (FBPC) with enhanced hydrophobicity for the sorption of crude oil. The prepared sorbent was characterised by the scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques, while the crude oil was characterised using standard methods. Batch sorption was used to determine the effect of contact time (30–150 min), temperature (25–100 °C), pH (2.0–10.0), oil concentration (4.0–12.0 g/L) and sorbent dosage (0.1–0.5 g) on sorption. SEM analysis of FBPC revealed a porous structure , while XRD confirmed the crystalline phases of feldspar. The crude oil samples had pH (6.40–6.60), density (0.960 0 0.962 g/cm 3 ), kinematic viscosity (24.0–27.6 cSt) and API gravity (24.25–24.51°). The Langmuir model with R 2 > 0.7781 presented the best fit than the Temkin and Freundlich model in the isotherm analysis, while the pseudo-second-order model with R 2 > 0.9711 was applicable in the kinetics of sorption. The thermodynamic analysis revealed a decrease in randomness at the crude oil-FBPC interface. The prepared FBPC was found to be an efficient inorganic–organic composite sorbent with enhanced hydrophobicity for the sorption of crude oil.